股票风险测评 进取型

ROFIN at Medtec Europe 2013 in Stuttgart

時間:2013-03-13 10:02來源:Opli作者:Savita 點擊:
------分隔線----------------------------

摘要:在2013 Medtec Europe上羅芬將展示新光纖和超短脈沖激光與改進的總方案。來自世界各地地醫療設備制造商已經在使用羅芬的飛秒激光系統超過三年了,這是一個獨特的豐富的經驗。Rofin也將展示最新的切割、打標、焊接激光系統模型

關鍵字:ROFIN,羅芬,fiber laser ,光纖激光器

Fig 1: StarFemto FX - unparalleled quality with cold laser processing even with brittle and temperature-sensitive materials

Fig 1: StarFemto FX - unparalleled quality with cold laser processing even with brittle and temperature-sensitive materials

At Medtec Europe 2013 ROFIN will showcase new fiber and ultrashort-pulse lasers alongside improved turnkey solutions. Medical device manufacturers all over the world have successfully been working with ROFIN's femtosecond laser systems for more than three years now, providing a unique wealth of experience. Rofin will also be presenting the latest models of their standard systems for cutting, marking and welding.

StarFemto FX - next generation femtosecond laser

Three years after introducing ultrashort-pulse lasers in medical manufacturing, ROFIN presents its next generation femtosecond laser source. With an adjustable pulse width from 300fs to 10ps and peak powers up to 660MW, the new StarFemto FX covers the requirements for ultrashort-pulse material processing.

New applications, especially those dealing with ceramics, glass and polymers, benefit from a significantly shorter fundamental wavelength of 1030 nm and optional second and third harmonic wavelengths of 515 and 343 nm. The StarFemto FX drills, cuts and structures almost every material with micron-scale precision. Cold material processing realizes taper-free cuts and holes with minimum scallop height and without any burrs. This not only opens new application fields, but as time and material consuming post-processing steps become obsolete, even well-established manufacturing processes can be implemented in a more efficient and cost-effective way.

With StarFemto FX and StarPico, ROFIN covers the entire ultrashort-pulse regime with industry-standard laser sources, providing the optimum solution for every application.

StarFiber FC OEM - fiber laser for micro cutting applications
At this year’s Medtec Europe ROFIN showcases an entirely revised fiber laser product lineup. The StarFiber 180 / 320 / 550 FC OEM sources offer extremely short slew rates and therefore realize highest possible pulse peak powers of up to 2400 W. The air-cooled laser sources in compact 19-inch rack format combine unique beam quality with high efficiency.

As a special highlight the StarFiber FC OEM sources offer a new fast parameter set switching capability. Thus initial piercing and the ensuing cutting pulse length and frequency can be predefined separately. This allows for a much faster and cleaner piercing, with less debris and lower thermal input.

 ROFIN at Medtec Europe 2013 in Stuttgart Ultrashort-pulse Lasers from ROFIN Achieve a New Level of Laser Material Processing without Thermal Damage   Fig 1: StarFemto FX - unparalleled quality with cold laser processing even with brittle and temperature-sensitive materials      inShare 5 Tweet February 14, 2013   At Medtec Europe 2013 ROFIN will showcase new fiber and ultrashort-pulse lasers alongside improved turnkey solutions. Medical device manufacturers all over the world have successfully been working with ROFIN's femtosecond laser systems for more than three years now, providing a unique wealth of experience. Rofin will also be presenting the latest models of their standard systems for cutting, marking and welding.   StarFemto FX - next generation femtosecond laser  Three years after introducing ultrashort-pulse lasers in medical manufacturing, ROFIN presents its next generation femtosecond laser source. With an adjustable pulse width from 300fs to 10ps and peak powers up to 660MW, the new StarFemto FX covers the requirements for ultrashort-pulse material processing.   New applications, especially those dealing with ceramics, glass and polymers, benefit from a significantly shorter fundamental wavelength of 1030 nm and optional second and third harmonic wavelengths of 515 and 343 nm. The StarFemto FX drills, cuts and structures almost every material with micron-scale precision. Cold material processing realizes taper-free cuts and holes with minimum scallop height and without any burrs. This not only opens new application fields, but as time and material consuming post-processing steps become obsolete, even well-established manufacturing processes can be implemented in a more efficient and cost-effective way.   With StarFemto FX and StarPico, ROFIN covers the entire ultrashort-pulse regime with industry-standard laser sources, providing the optimum solution for every application.   StarFiber FC OEM - fiber laser for micro cutting applications  At this year’s Medtec Europe ROFIN showcases an entirely revised fiber laser product lineup. The StarFiber 180 / 320 / 550 FC OEM sources offer extremely short slew rates and therefore realize highest possible pulse peak powers of up to 2400 W. The air-cooled laser sources in compact 19-inch rack format combine unique beam quality with high efficiency.   As a special highlight the StarFiber FC OEM sources offer a new fast parameter set switching capability. Thus initial piercing and the ensuing cutting pulse length and frequency can be predefined separately. This allows for a much faster and cleaner piercing, with less debris and lower thermal input.     Fig 2: StarFiber FC OEM realizes complex cutting geometries
Fig 2: StarFiber FC OEM realizes complex cutting geometries

StarCut Tube - the tube cutting standard

Equipped with StarFemto FX or StarFiber FC laser sources, the StarCut Tube achieves contour accuracies better than +/- 5 μm and strut widths down to a few microns. ROFIN's market-leading high-precision laser cutting system realizes the smallest cutting widths with delicate materials like Nitinol or Platinum. No other stent cutting systems offer such a wealth of options and extensions, from a 2+2 option for offset cutting and flat sheet cutting to an automatic tube-loading magazine that facilitates multi-shift operation.

Fig 3: StarCut Tube - market-leader for cutting medical implants and stents
Fig 3: StarCut Tube - market-leader for cutting medical implants and stents

New EasyMark desktop laser marker with innovative housing concept

The new EasyMark desktop laser marker realizes an innovative housing concept. The control unit and the working chamber are designed as separate modules. This provides maximum flexibility for assembling optimum system setups for each individual application. The system not only handles standard applications with manual part placement and removal but also semi or fully-automated production lines.

Fig 4: The new compact EasyMark marks even bulky workpieces, stand-alone or integrated in production lines
Fig 4: The new compact EasyMark marks even bulky workpieces, stand-alone or integrated in production lines

Performance for welding bulky parts

Also live at the MEDTEC: the Performance now features sidewalls with additional openings as an option. This allows for convenient feeding of bulky parts. Two years ago, ROFIN's manual welding system once more raised the standards for power and usability. Now even long parts, such as endoscopes, can be welded comfortably.

Fig 5: The Performance facilitates welding of long and bulky workpieces.
Fig 5: The Performance facilitates welding of long and bulky workpieces.

Rotating fiber-optics

Another premiere at the MEDTEC is ROFIN-LASAG's innovative laser processing head. The sophisticated rotating laser head allows for circular laser processing of tiny workpieces, sitting in a tray, or bulky parts, not suitable for mounting on a rotary axis. A synchronously rotating gas nozzle precisely delivers assist gas for perfect circular weld seams. Application examples are many, from manufacturing of parts for pharmaceutic facilities to cannula, medical instruments or valves to assembling endoscopes.

Fig 6: Rotating fiber-optics (LLDROP) for circular laser processing of tiny workpieces or bulky parts
Fig 6: Rotating fiber-optics (LLDROP) for circular laser processing of tiny workpieces or bulky parts 

【光粒網綜合報道】( 責任編輯:光粒網 )
頂一下
(0)
0%
踩一下
(0)
0%
------分隔線----------------------------

凡光粒網注明"來源:光粒網"或"來源:www.zcgokl.tw"的作品,包括但不限于本網刊載的所有與光粒網欄目內容相關的文字、圖片、圖表、視頻等網上內容,版權屬于光粒網和/或相關權利人所有,任何媒體、網站或個人未經光粒網書面授權不得轉載、摘編或利用其它方式使用上述作品;已經書面授權的,應在授權范圍內使用,并注明"來源:光粒網"。違反上述聲明者,本網將追究其相關法律責任。

【免責申明】本文僅代表作者個人觀點,與光粒網無關。其原創性以及文中陳述文字和內容未經本站證實,對本文以及其中全部或者部分內容、文字的真實性、完整性、及時性本站不作任何保證或承諾,請讀者僅作參考,并請自行核實相關內容。

在線投稿有投稿需求的公司企業請直接在線申請,其他項目合作聯系 QQ:1965483967 QQ:2644977628 → 在線申請投稿 >
Copyright  ©  2010-2018 diodelaser.com.cn Inc. All rights reserved.光粒網 版權所有
鄂ICP備11013139號-2

鄂公網安備 42018502002510號

股票风险测评 进取型 国产aⅴ视频视频在线 雪缘园棒球比分 黑龙江十一选五组走 足彩比分新浪直播即时比分直播 香艳麻将内购破解版 足球指数比分 体球手机足球比分直播 微乐江西 云南11选5一定牛 日本番号网址 南宁小姐一条龙服务 福建22选5最新开奖结果今天 什么叫配资 贵阳小姐上门按摩 北京11选5开奖结 股票指数期权与股票指数期货有哪些不同